SONY WALKMAN WM - 10 VINTAGE 1983 VERY RARE
Item History & Price
| Reference Number: Avaluer:1094740 | Model: WM-10 |
| Brand: Sony | Type: Mini Cassette Player (Walkman) |
COSMETIC CONDITION PLEASE SEE PHOTOS(PERSONAL OPINION GOOD)WORKING CONDITION FOR PARTS OR REPAIR ONLY WALKAMAN SALE
!!!THE BATTERY CLIP STAYS IN PLAYS WITHOUT PROBLEM BUT IS NOT HANG ON WELL
the battery compartment covers clips are broken so the cover doS not clip in securely
Sold for not working, for repair and fix.only player (no ACCESORY !)
Look carefully pictures , sold as it! No return, no refund. Thank
ITEM Condition:
Overall cosmetic con...dition: 7 out of 10 (For Parts or Repair)
Working:NO!!!!!NO TESTED For Parts or Repair. Please buy only if you can repair it or will use this item for exhibition, decoration or other purpose. Some of the items I sell are nearly 30 years old! I always try to make careful description of overall item condition. Please Read before placing bid. Even, at the moment I place item on Auction item is working and I mention this in Description, I cannot make any guarantee that it will work accordingly to item specifications or that this item not will stop working at any moment. Items considered as for parts or repair have high risk of low quality in condition or dysfunction.
Please be aware of this risk before placing your bids. Please, No Return !
Despite being a fairly early model, the WM-10 was the smallest of all the cassette-playing Walkman models. Its tiny size is amazing even now, and represents a considerable achievement in the context of what was possible in the early 80’s. The WM-10 was smaller even than the cassette it played and had to be slid open to make the cassette compartment large enough to take the tape. This of course meant that it became considerably larger before it was useful. Such practical shortcomings miss the point of the WM-10 however, as its main function was to demonstrate Sony’s continuing technical leadership by producing yet another “world’s smallest” product.Making the WM-10 so small was not simply a case of taking the WM-2 and halving the size of each part. New techniques were required to achieve a worthwhile reduction in size. With the size of the cassette fixed, the other large parts in any cassette player are the battery and the motor. The motor was miniaturised by changing it from a cylindrical form (as in the WM-2, where the motor is about the same size as an AA battery) to a flat disc. The BSL (brushless and slotless) motor used in the WM-10 was based on techniques used for direct-drive turntables, though to make the tiny motor powerful enough it had to rotate very fast. The disc and magnet coils could be made very thin, but this still left the bearings, which had to be sturdy to maintain the small clearances required between the disc and the coils, to be housed somewhere. The clever solution to this problem was to place the bearing inside the centre of the supply spool, where it could be made large and long enough to function properly. The spool itself was driven by a large gear, so no access to its shaft was needed.
WM-10 with body expanded to accept a cassetteThe battery presented another problem. One answer would have been to use specialised cells, but these would soon have become a burden if not easily available. The decision to use a single AA type battery was a brave one, and backed up by more clever technology. The 1.5V available from this source was not enough to run the electronic parts of the amplifier and servo, so a step-up DC-DC converter was used to boost the voltage to a useful level. Sony had used these devices in the past, in models such as the TC-D5 and the WM-7, but for the WM-10 something all together smaller was needed. The converter used in the WM-10 was made using miniature components on a thin, flexible printed circuit. This was then rolled up on itself into a tube and tucked down the side of the chassis. By these means, a compact assembly that was well screened from the rest of the circuitry was realised. The single AA battery was housed in a compartment next to the heads at the top of the machine, and usefully employed the depth in the case required for the heads to retract into.Other methods of keeping the size of the WM-10 small included the use of extra thin case materials, miniature surface mounted electronic parts and an unusually thin printed circuit panel with track work on both sides.Despite being very small, the WM-10 was not sparse on facilities. It included Dolby B NR, normal/chrome/metal tape compatibility and automatic stop in all modes. A switch inside the headphone socket prevented the power being turned on unless the headphones were connected, thus protecting the battery from waste. If the WM-10 did have a failing, it was that it was rather fragile, though subsequent models in the series addressed this problem.
