This is a vintage, Horizontal Fleischmann125-2 steam engine. It is in good operationalcondition. I tested it and it ran great. I made a copper boiler with a 6mm x.75 pitch collar for the original Fleischmann safety valve. I also made a 6mm x.1 pitch brass collar and brass filler plug and a ¼” x32 TPI collar and brassoverflow plug too. I made new brassstraps on the boiler and new copper steam lines throughout. It is double acting/reversible with plenty ofpower. &nbs...p;The original safety valve worksfine. It also has a new Jensen tray (used once for tests) and a homemade smokestack with it. I made a new brass oil access fill cup and brass cap for it. Toget you started, I tossed in a bottle of steam cylinder oil and an eight ounce/250ml incremented fill bottle. I also added a bag of Hexamine fuel tablets. I found a copy of Fleischmann instructions andincluded them with some other info. Irepainted the base and some touchup work. The piston does not have the trim butthis does not affect the operation of it. It is mounted on a hand crafted Florida Spruceplague. I used existing holes to mount it with stainless steel screws. It could use a little clean up. Please viewall the pictures. What you see is what you get. Thanks for viewing the engine and good luckbidding. Shipping; I ship the first work day after you buy the item.In order to expedite your order I go to the post office as soon as it opens thefollowing day. This is 9:00 am EST at the PO I use. So, for both of us, pleasemake payment at the time of the order. I take great care in packing my machinesso they will not get damaged in shipping. Since they are pre-packed, I cannotcombine engines. I do my best to save you shipping cost by using the smallestpossible box and light packing material. Note; Sometimes Spruce will get a warp to it as it dries. Idry my lumber in a rack for several months, but this is not always enough. Whenit changes climates from the high humidity of Florida to an area that is proneto have low humidity it can exacerbate this condition. I always position myengine or accessory on the top of the crown, so it should stay level on theintended surface. This seldom happens, but I wanted you to know it is a possibility.I usually start the bidding belowwhat I have in it. Sometimes I do well sometimes not, but I am doing somethingI love. Enjoy your stream engine, RicDickens Made in GermanyDimensionsMachine- L 10” X W 9.25” X H 15.25”Plaque- L 11.25” X W 10.75” X H 3/4”Shipping Box – L 12” X W12” X H10”Weight - 5 lbs 14 oz Vintage HorizontalFleischmann 125-2 live steam engine (A)