PEPSI COLA VENDING MACHINE PRINTED ADHESIVE VINYL DECAL FRIDGE 23 " W X 70 " H
Item History & Price
| Reference Number: Avaluer:15305461 | Type of Advertising: Adhesive Vinyl Decal |
| Color: Original Colors | Country/Region of Manufacture: United States |
PEPSI COLA VENDING MACHINE PRINTED ADHESIVE VINYL DECAL CUSTOM 23" Wide X 70" High4ml adhesive vinyl with gloss over-laminate.Suitable for installation on any clean, smooth surface.PERFECT TO DECORATE A REFRIGERATOR (CONFIRM YOUR DIMENSIONS)Usage: Indoor or Outdoor; Waterproof and UV safe that will last for years.Digitally printed to reproduce the fullcolor image as shown.The “example” watermark will not beprinted on the actual adhesive vinyl.Trimming of white background may be req...uired.Fulfillment of the custom order willinclude printing time and shipment.WE CAN DESIGN AND PRINT ANY CUSTOM SIZES OR BRANDS. MESSAGE FOR ANY CUSTOM REQUESTS~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Decal Installation Instructions:To install the vinyl decal, you can use a wet application method since this is fairly large decal and the wet method makes it easier to handle.Just get a quart spray bottle, fill about ¾ with water, then about a cup of Isopropyl alcohol and 3-4 drops of regular (not ultra) dishwashing liquid.Shake it up after combining.Make sure to clean the front of the fridge with something that will also degrease.Lay the decals face down on a table or the like and then pull back the backing paper (don't let the backing paper get in any water/liquids or it will tear and stick to the decal). Make sure the area you are working in is clean with no dirt or dust. Also try to avoid a windy location.Once you get the paper off mist the back of the vinyl (the sticky side) thoroughly.Then also mist the surface of the fridge.This way the vinyl will not grab and you can re-position to get it lined up perfectly. It will also prevent the decal from adhering to itself if it gets folded over by accident.Once you get it where you like it, you can start smoothing it out with your hands and then start using something like a rubber squeegee to push all of the water and bubbles out.The water is the vehicle for the wetting agent, the soap keeps it from grabbing prematurely and the alcohol helps dry the water and gets the adhesive to grab once you squeegee it.Work from the center out start with a Cross, then an “X” and then from the middle out on the triangle pieces until it's all smoothed out, always working from the center to the outside.If there are any bubbles trapped, just poke them with a pin and push the air/water out.You can then just leave to dry and set or run a hairdryer over it to set the glue in the adhesive.The vinyl is fairly thick with the over-laminate, so it is pretty easy to work with.
