Photoresist Dry Film Developer For DIY PCB 80 Grams
Item History & Price
Reference Number: Avaluer:17424814 | Developer: 80 grams |
Pack of Photoresist Dry Film Developer (Net weight : 80g each) .When you order two pieces and choices Standard Int'l Shipping - one pack free!
Specific:
For develop negative photoresist dry filmNet Weight: 80g
Instruction:
1. Making developing solution:
Mix the developer powder with 100x water in plastic container, (eg. 10g powder with 1000cc (or 1000ml, 1L) water)2. Develop board (in a dark room):&...nbsp; Drop the board into the solution copper side up. The goal here is to remove all of the resist (coating) that was not exposed to UV light. Once the resist is removed these areas will be down to bare copper. You can slosh the board or container to develop it faster.3. Rinse: Rinse the circuit board in cool water. Ensure that all of the previous solution is cleaned off the board.
Notice: Solution Temperature: 15oC~30oC, higher temperature, faster developing, but never ever >30oC.Don't use same container for developing and etching.Solution will be failure after 24 hours.The developing time will be increased one after one of the board developed. Warning:Keep out of the reach of children
Delivery in Europe 3-9 days!!!!!!!!!!!!!!!
Specific:
For develop negative photoresist dry filmNet Weight: 80g
Instruction:
1. Making developing solution:
Mix the developer powder with 100x water in plastic container, (eg. 10g powder with 1000cc (or 1000ml, 1L) water)2. Develop board (in a dark room):&...nbsp; Drop the board into the solution copper side up. The goal here is to remove all of the resist (coating) that was not exposed to UV light. Once the resist is removed these areas will be down to bare copper. You can slosh the board or container to develop it faster.3. Rinse: Rinse the circuit board in cool water. Ensure that all of the previous solution is cleaned off the board.
Notice: Solution Temperature: 15oC~30oC, higher temperature, faster developing, but never ever >30oC.Don't use same container for developing and etching.Solution will be failure after 24 hours.The developing time will be increased one after one of the board developed. Warning:Keep out of the reach of children
Delivery in Europe 3-9 days!!!!!!!!!!!!!!!