TEAC R - 999X Auto Reverse Stereo Cassette Deck - Full Service May 2020 - Vintage
Item History & Price
| Reference Number: Avaluer:26131931 | Featured Refinements: TEAC Cassette Deck |
| Country/Region of Manufacture: Japan | Model: R-999X |
| Brand: TEAC | Modified Item: No |
Teac R-999X Auto Reverse Stereo Cassette Deck I am the original owner - purchased in 1985 May 2020 serviced done here in San Diego. I had it sitting for several years unused. Completely checked out, bill on that service was $320 Includes original manual. No remote, I never purchased one. The main features of the TEAC R-999X are: 3 heads and off-tape monitoring, digital tape counter with 4 digits, automatic tape type selection and capable of handling normal, chrome and metal ta...pes, auto reverse transport. Typical front loading cassette deck with the cassette compartiment located on the left side of the deck. Tape eject is operated mechanically and the cassette needs to be placed with the side to be played facing forward in the cassette well. Level meters used on the R-999X are generic digital peak reading meters. Full-logic transport controls used on the R-999X let it respond to the slightest finger contact for fast and effortless transport function selection. To ensure the best response from the wide variety of tapes available adjustment of, bias and sensitivity, to optimum levels can be performed prior to recording. Dolby C-type used in the R-999X provides 20 dB of noise reduction above about 1, 000 Hz, fully doubling the amount given by B-type. Dbx Type II found in the R-999X is a simplified version of the Type I noise reduction system. The dbx Type II system was designed to be used with systems with limited bandwidth such as cassette based recorders and also uses a simple 2:1:2 compander to reduce noise. The 19kHz multiplex pilot slgnal present in FM stereo broadcasts can cause false triggering of the noise reduction system. The switchable MPX filter of the R-999X filters out the pilot signal, and assuring proper Dolby processing of FM stereo programs. For undisturbed listening a jack connector for a pair of stereo headphones is supplied. Connection to other audio components for plaback can be achieved by a RCA cable and recording from a source by a RCA cable. All main transport commands can be issued remotely with a wired remote control ( not included in this listing ).
