Vintage Blue Slag Glass Tulip Wall Sconce Tulips GIM 616 Brass
Item History & Price
| Reference Number: Avaluer:2864819 |
This very lovely Vintage Wall Sconcefeatures a brass wall plate, and the slagglass tulip petals are wrapped in brass.
The arms of the sconce are made from a Ferrous(magnetic) metal.
It features a switch on the front bottomsection and on the back side is an attachedmetal hook, to hold sconce to wall.
The shades are screw on.Sockets take regular size bulbs.
The Brass back plate is ornamental featuringan Acanthus leaves design.
Tulip shaped shades screw onto a nice hea...vy socket.
Overall the sconce is in very good condition.It might need a little cleaning to the glass, to remove some dust bunnies, smudges, otherwiseglass is in very good condition.
Metal has developed a patina and the arms havesome very light spots of surface rust. No issues thataffect the integrity of the sconce.The metal arms and back plate are in very goodcondition. I did however note there are 2 tiny spots of solder residue on the arms. It is not a repair, its is residue.
This is a pretty and cheerful looking wall sconce.The sconce is designed so the tulips point upwardswhen mounted on the wall!
Sconce is signed GIM 616. I did some searchingand found a lamp made by St Clair House of Glasswhose base was Marked with the GIM marking.I cannot vouch if this sconce was made by St Clairor not.The sconce is a nice quality piece so it is possible.
As if with any older electrical lighting, please checkwiring before using or installation.
Measurements - Width is approx. 18 and 1/2 inchesHeight of Tulip Shade as mounted to fixture - measured from the curve in the armto top of a petal is approx. 9 and 3/4 inches high.Wall Projection - Approx 7 inches
I Ship both USPS or FEDEX so please check the ratesunder "shipping" for the best rate to your zip code!
The arms of the sconce are made from a Ferrous(magnetic) metal.
It features a switch on the front bottomsection and on the back side is an attachedmetal hook, to hold sconce to wall.
The shades are screw on.Sockets take regular size bulbs.
The Brass back plate is ornamental featuringan Acanthus leaves design.
Tulip shaped shades screw onto a nice hea...vy socket.
Overall the sconce is in very good condition.It might need a little cleaning to the glass, to remove some dust bunnies, smudges, otherwiseglass is in very good condition.
Metal has developed a patina and the arms havesome very light spots of surface rust. No issues thataffect the integrity of the sconce.The metal arms and back plate are in very goodcondition. I did however note there are 2 tiny spots of solder residue on the arms. It is not a repair, its is residue.
This is a pretty and cheerful looking wall sconce.The sconce is designed so the tulips point upwardswhen mounted on the wall!
Sconce is signed GIM 616. I did some searchingand found a lamp made by St Clair House of Glasswhose base was Marked with the GIM marking.I cannot vouch if this sconce was made by St Clairor not.The sconce is a nice quality piece so it is possible.
As if with any older electrical lighting, please checkwiring before using or installation.
Measurements - Width is approx. 18 and 1/2 inchesHeight of Tulip Shade as mounted to fixture - measured from the curve in the armto top of a petal is approx. 9 and 3/4 inches high.Wall Projection - Approx 7 inches
I Ship both USPS or FEDEX so please check the ratesunder "shipping" for the best rate to your zip code!
