PAIR NIB UTC LS - 35 Output Transformers EL34 2A3 300B 6B4G Push Pull Tube AMP
Item History & Price
| Reference Number: Avaluer:29707051 | Featured Refinements: Vintage Tube Output Transformer |
| MPN: LS-35 | Model: LS (Linear Standard) |
| Brand: UTC | Country/Region of Manufacture: United States |
| Bundle Listing: No |
Up for sale is a Brand New NOS NIB pair of UTC LS-35 series Output Transformers for push pull EL34, 300B, or 2A3 tubes. This is possibly the last remaining Brand New in the Box LS-35 pair in existence!
They are made in U.S.A and true Hi-Fi wide band transformers. They were never soldered to or mounted or used in anyway. They are potted in beautiful Gray color sand cast enclosures. All coils are tested with a LCR meter, and a signal generator with an oscilloscope. There is No Op...en or Shorted turns in Primary and Secondary! It lives up to the UTC name with very FLAT frequency response below 20Hz all the way to 20KHz.
UTC published frequency response is 7Hz to 50KHz with +1dB or -1dB for the entire bandwidth.
UTC Model LS-35 output transformers are made with very special Hypermalloy core and it's very linear within 1dB from 20Hz-20KHz (Cycles). They are suitable for that dream push pull amps with EL34, 300B, 350B, 2A3/6A3/6B4G, 6L6, 6AS7G, 6080 tubes. This model is specially made by UTC for EL34 push-pull amp with 43% screen taps for use with Class AB feedback design. Each transformer is a very hefty LS3 case which weights a little more than 15LBs. They are very rare and very seldom seen 35W LS3 case potted transformers.
Primary impedance for Plate to Plate 5000ohm with 43% screen taps. UTC has published a circuit for the LS-35 transformer and I can provide the printout of the circuit.
Secondary has the usual 16, 8, and 4 ohms output impedance for the speakers (aka Voice Coil) use.
Of course, they were made here in the Good Old U.S.A!
Each transformer weights about 16lbs so there will be a total of 45LBs for shipping weight in a well packed double box package.
Pictures are of the actual transformers! What you see is what you get!
From the UTC catalog, the LS3 case has the following dimension. 5&13/16"L x 5"W x 4&11/16"H
I will be listing many UTC Transformers in the next few days so check out my other items.
Please NOTE THAT this transformers are New BUT IT IS SOLD AS-IS DUE TO AGE.
Return is NOT Accepted Due to the nature of the Vintage Item.
I only sell the good parts and want to make sure you get the good parts.
They will be packed well for safe shipping.
I will ship them Internationally with USPS Priority Mail Insured.
They are made in U.S.A and true Hi-Fi wide band transformers. They were never soldered to or mounted or used in anyway. They are potted in beautiful Gray color sand cast enclosures. All coils are tested with a LCR meter, and a signal generator with an oscilloscope. There is No Op...en or Shorted turns in Primary and Secondary! It lives up to the UTC name with very FLAT frequency response below 20Hz all the way to 20KHz.
UTC published frequency response is 7Hz to 50KHz with +1dB or -1dB for the entire bandwidth.
UTC Model LS-35 output transformers are made with very special Hypermalloy core and it's very linear within 1dB from 20Hz-20KHz (Cycles). They are suitable for that dream push pull amps with EL34, 300B, 350B, 2A3/6A3/6B4G, 6L6, 6AS7G, 6080 tubes. This model is specially made by UTC for EL34 push-pull amp with 43% screen taps for use with Class AB feedback design. Each transformer is a very hefty LS3 case which weights a little more than 15LBs. They are very rare and very seldom seen 35W LS3 case potted transformers.
Primary impedance for Plate to Plate 5000ohm with 43% screen taps. UTC has published a circuit for the LS-35 transformer and I can provide the printout of the circuit.
Secondary has the usual 16, 8, and 4 ohms output impedance for the speakers (aka Voice Coil) use.
Of course, they were made here in the Good Old U.S.A!
Each transformer weights about 16lbs so there will be a total of 45LBs for shipping weight in a well packed double box package.
Pictures are of the actual transformers! What you see is what you get!
From the UTC catalog, the LS3 case has the following dimension. 5&13/16"L x 5"W x 4&11/16"H
I will be listing many UTC Transformers in the next few days so check out my other items.
Please NOTE THAT this transformers are New BUT IT IS SOLD AS-IS DUE TO AGE.
Return is NOT Accepted Due to the nature of the Vintage Item.
I only sell the good parts and want to make sure you get the good parts.
They will be packed well for safe shipping.
I will ship them Internationally with USPS Priority Mail Insured.
