4 X 12AX7A Raytheon - Baldwin Tubes Long Black Plts Very Strong Quad 1960 (2 Avail)
Item History & Price
Reference Number: Avaluer:29725553 | Modified Item: No |
Type: Vacuum Tube | Custom Bundle: No |
Brand: Raytheon | Non-Domestic Product: No |
Made in USA for Baldwin
Long Ribbed Black plates
O getter
The lettering is smudged/worn
Codes P28060-49C = 1960
Tested on Enhanced Triplet E3444 Laboratory Tester prepared by Paul Hart of Ga.
Quad # 11410/1400 micromhos @ .85/.89 mA
1450/1480 micromhos @ .77/.87 mA
1420/1450 micromhos @ .84/.93 mA
1430/1460 micromhos @ .81/.86 mA
Quad # 21340/1480 micromhos @ .74/.91 mA
1430/1370 micromhos @ .84/.83... mA
1420/1350 micromhos @ .78/.71 mA
1380/1430 micromhos @ .80/.84 mA
Bogey(100%) = 1600/1600 micromhos @ 1.2/1.2 mA +/- 10%
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-2.0___Volts bias or Cathode resistance*
What were your tubes tested at?
I do combine S&H
00040