Antique Tools Brass Blow Torch Wood Handle Tools Soldering Iron Steam Punk Decor
Item History & Price
| Reference Number: Avaluer:3081902 |
Antique Tools Brass Blow Torch Wood Handle Tools Soldering Iron Steam Punk Decor. Condition is Used. Shipped with USPS Priority Mail. ***** This is a lot of 7 antique tools:
1 Unusual brass handle propane blow torch. Tank handle is stamped Primus No 890 and Made in Swe??? (Sweden?). Approx 16 inches long. Shows dirty staining and wear, but a great display item. Hand hold/fuel tank is cylindrical and appears to be brass. Not tested; valves work freely; don’t see any rea...son it would not actually work.
2 Irwin No 21 drill bits in original box. Comes with 2 bits that are adjustable to bore from 5/8 to 1 3/4 inch holes. Bits are sharpe and appear to have seen little use, but faded and worn from age. Box is well worn, but no tears; with great advertising label. Made in Wilmington, Ohio, USA. Box is approx 1x 2.25x9.25 inches.
3 Vintage soldering iron; approx 8.5 inches long. Handle appears to be bakelite or catalin and cork. Used; solder on tip and wear. Looks like original old cord was replaced and tape covers area where new cord was spliced at base of iron. Not tested.
4. Spiral pump action bit driver. Wood handles, brass bit holder; comes with 1 pointed bit. Approx 11 inches long. Works; signs of wear/use/age.
5. Old scissors stamped Pecka and Germany. Approx 7 inches long. Aged and worn.
6. Phillips screwdriver; wood handle; approx 5 inches long. Worn with light corrosion on metal.
7. Old wood handle ice pick; approx 6 inches long. Worn, light corrosion on metal, handle split (someone drove a nail into end; should be able to pull out nail and glue handle).This is a great display group for the collector of vintage tools, work shop, household items, general store, Steam Punk, Industrial, advertising, etc.
What you see is what you get.Pictures are part of the description; examine closely.When in doubt: Ask questions BEFORE bidding.
NOTE: I use a flat S&H fee; so plan on it when placing your bid. That is easiest for both you and I. It is also the most fair way for all bidders; the final total price is the same no matter where you live. Bidders who live close to me do not have an unfair advantage over those on the West Coast. The auction will determine the true value of this item when the flat fee is known to all bidders. I try to estimate cost to ship to the West Coast closely, and add a little pad after having undercharged on several occasions. However, the flat fee applies ONLY to shipment within the lower 48 continental US; S&H may be higher outside the lower 48, so if you win this auction and live outside the lower 48 states, wait for an invoice from me before making payment.Seller reserves the right to change shipping method from that shown in listing details.I also accept check or MO.NO international sales (except thru eBay global shipping center).
1 Unusual brass handle propane blow torch. Tank handle is stamped Primus No 890 and Made in Swe??? (Sweden?). Approx 16 inches long. Shows dirty staining and wear, but a great display item. Hand hold/fuel tank is cylindrical and appears to be brass. Not tested; valves work freely; don’t see any rea...son it would not actually work.
2 Irwin No 21 drill bits in original box. Comes with 2 bits that are adjustable to bore from 5/8 to 1 3/4 inch holes. Bits are sharpe and appear to have seen little use, but faded and worn from age. Box is well worn, but no tears; with great advertising label. Made in Wilmington, Ohio, USA. Box is approx 1x 2.25x9.25 inches.
3 Vintage soldering iron; approx 8.5 inches long. Handle appears to be bakelite or catalin and cork. Used; solder on tip and wear. Looks like original old cord was replaced and tape covers area where new cord was spliced at base of iron. Not tested.
4. Spiral pump action bit driver. Wood handles, brass bit holder; comes with 1 pointed bit. Approx 11 inches long. Works; signs of wear/use/age.
5. Old scissors stamped Pecka and Germany. Approx 7 inches long. Aged and worn.
6. Phillips screwdriver; wood handle; approx 5 inches long. Worn with light corrosion on metal.
7. Old wood handle ice pick; approx 6 inches long. Worn, light corrosion on metal, handle split (someone drove a nail into end; should be able to pull out nail and glue handle).This is a great display group for the collector of vintage tools, work shop, household items, general store, Steam Punk, Industrial, advertising, etc.
What you see is what you get.Pictures are part of the description; examine closely.When in doubt: Ask questions BEFORE bidding.
NOTE: I use a flat S&H fee; so plan on it when placing your bid. That is easiest for both you and I. It is also the most fair way for all bidders; the final total price is the same no matter where you live. Bidders who live close to me do not have an unfair advantage over those on the West Coast. The auction will determine the true value of this item when the flat fee is known to all bidders. I try to estimate cost to ship to the West Coast closely, and add a little pad after having undercharged on several occasions. However, the flat fee applies ONLY to shipment within the lower 48 continental US; S&H may be higher outside the lower 48, so if you win this auction and live outside the lower 48 states, wait for an invoice from me before making payment.Seller reserves the right to change shipping method from that shown in listing details.I also accept check or MO.NO international sales (except thru eBay global shipping center).
