BITMAIN ANTMINER S9 14TH/s WITH APW3, PSU Power Supply - BTC BCH BITCOIN MINING
Item History & Price
Reference Number: Avaluer:38747792 |
Used BITMAIN ANTMINER S9 14TH/s WITH APW3++ PSU - BTC BCH BITCOIN MINING.
Tested before shipping. Antminer S9 14TH/s Technical Specifications from Bitmain· Hash Rate - 14TH/s.Variation of ±5% is expected· Power Consumption - 1323W(13.5TH/s batch), (at the wall, with Bitmain?s APW3 PSU, 93% efficiency, 25°Cambient temp). Expected discrepancy of +10%· &nbs...p; Power Efficiency - 0.098J/GH +10% at the wall (with Bitmain?s APW3 PSU, 93% efficiency, 25°C ambienttemp)· Rated Voltage - 11.60~13.00V· Chip quantity per unit - 189xBM1387· Dimensions - 350mm(L)x 135mm(W) x 158mm(H)· Cooling - 2x12038 fans; Front fan: 6000rpm, Rear fan: 4300rpm· Operating Temperature - 0°Cto 40°C· Network Connection - Ethernet· Frequency - Automatically set
Antminer APW3++ 1600w power supplyNote: This batch ships out witin 5 days upon receipt of payment. (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: Up to two years warranty instead of 180 days.1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer X3 miner.
4. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored. SpecificationsOutputDC Voltage12.15VRated Current
(220V input)133ARated Current
(110V input)100ARated Power
(220V input)1600WRated Power
(110V input)1200WRipple & Noise<1%Voltage Regulation<2%Source Regulation<1%Load Regulation<1%Setup, Rise Time<2SPower off Protection Trip Time>9mSInterface Type 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)Noise Level <43DBInputVoltage Range100-240V ACStarting Voltage95-105V ACFrequency Range47-63HzPower Factor>0.95 (full load)Leakage Current<1.5mA (220V 50Hz)ProtectionLow-voltage Input80-89V ACOutput Short CircuitYesOutput Overcurrent134-185A max.Overheat ProtectionYesEnvironment ConditionsOperating Temperature-20°C – 50°COperating Humidity20% – 90% relative humidity (non-condensing)StructureDimensions220mm*108mm*62mmCoolingFanForced-air cooling
Tested before shipping. Antminer S9 14TH/s Technical Specifications from Bitmain· Hash Rate - 14TH/s.Variation of ±5% is expected· Power Consumption - 1323W(13.5TH/s batch), (at the wall, with Bitmain?s APW3 PSU, 93% efficiency, 25°Cambient temp). Expected discrepancy of +10%· &nbs...p; Power Efficiency - 0.098J/GH +10% at the wall (with Bitmain?s APW3 PSU, 93% efficiency, 25°C ambienttemp)· Rated Voltage - 11.60~13.00V· Chip quantity per unit - 189xBM1387· Dimensions - 350mm(L)x 135mm(W) x 158mm(H)· Cooling - 2x12038 fans; Front fan: 6000rpm, Rear fan: 4300rpm· Operating Temperature - 0°Cto 40°C· Network Connection - Ethernet· Frequency - Automatically set
Antminer APW3++ 1600w power supplyNote: This batch ships out witin 5 days upon receipt of payment. (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: Up to two years warranty instead of 180 days.1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer X3 miner.
4. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored. SpecificationsOutputDC Voltage12.15VRated Current
(220V input)133ARated Current
(110V input)100ARated Power
(220V input)1600WRated Power
(110V input)1200WRipple & Noise<1%Voltage Regulation<2%Source Regulation<1%Load Regulation<1%Setup, Rise Time<2SPower off Protection Trip Time>9mSInterface Type 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)Noise Level <43DBInputVoltage Range100-240V ACStarting Voltage95-105V ACFrequency Range47-63HzPower Factor>0.95 (full load)Leakage Current<1.5mA (220V 50Hz)ProtectionLow-voltage Input80-89V ACOutput Short CircuitYesOutput Overcurrent134-185A max.Overheat ProtectionYesEnvironment ConditionsOperating Temperature-20°C – 50°COperating Humidity20% – 90% relative humidity (non-condensing)StructureDimensions220mm*108mm*62mmCoolingFanForced-air cooling