Paul Chen Scottish Basket Hilt Broadsword Sword Hanwei Deal
Item History & Price
Reference Number: Avaluer:49159662 | Brand: hanwei |
Original/Reproduction: Reproduction | Country/Region of Manufacture: China |
Edge: dull practice |
31 1/2" BLADE. BLADE IS DULL AND ROUNDED TIP FOR PRACTICE BATTLE.
SHIPS FAST AND FREE TO USA ONLY
INFO
Paul Chen Practical Basket Hilt Broadsword Sword
by HanweiItem # SH2059
The Paul Chen Practical... Basket Hilt Broadsword Sword with ScabbardThe Paul Chen Practical Basket Hilt Broadsword is built for the re-enactor. The blade is unsharpened, with 1/16" safety edges and rounded tips, complying with the combat rules of many re-enactment societies. The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge notching to acceptable levels while providing resilience and protection against brittleness. The scabbard is finished in matte black, ready for owner customization if desired.Although Basket Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the seventeenth and eighteenth century Scottish highlander has become legendary. Early highland swords almost invariably carried the double-edged "broadsword" blade but by the time of the Battle of Culloden (1746) the single-edged "backsword" was at least equal in popularity.
This fully functional broad sword is tailored to meet the demands of re-enactment and stage combat.Overall Length: 38 1/8"
Sword Weight: 2 lbs
Blade Length: 31 3/4"
Handle Length: 6 1/2"
Blade Material: 1065 high carbon steel, hardened to 50HRC , unsharpened, rounded tip
Point of Balance: 5"
Point of Harmonics: 20"
Width at Guard: 1.67"
Width at Tip: .73"
Thickness at Guard: .23"
Thickness at Tip: .15"
Factory: Hanwei China
Designer: Paul Chen
Scabbard: Matte Black finish
Rated: Fully Functional
Authentic styling
Great for re-enactors
Complies with safety requirements
Warning:
All Edged Weapons, Battle Ready or Not, May Injure, Kill
and/or Become Damaged if Used ImproperlyYou must be at least 19 years of age in order to purchase any knife or sword from this site. By ordering any knife or sword you are certifying that you are at least 19 years of age. Purchaser is responsible for compliance with all applicable laws and regulations, which may vary. By accepting delivery purchaser agrees that RealCoolSavings and affiliated companies and individuals have no liability to purchaser, or any person whatsoever arising from any use of products purchased from this site.
Sword Care Do and Don't
Sword Do's & Don'ts:
All edged weapons, battle ready or not, may injure, kill and/or become damaged if used improperly. Follow these do's and don'ts to safely enjoy your sword(s) for years to come.
Use common sense. Do not swing any edged weapon carelessly. Keep in mind that your sword, battle ready or not, is still a potential weapon that can injure or kill someone. Although we all have a "warrior" inside of us, we are not always on a battlefield. Make sure you are in an area where you can swing your weapon without hitting someone or something. Swords can also slip out of your hands. Selling your sword to pay for a lawsuit settlement is a big bummer. Be very careful and use common sense when handling your sword.Do not bang your sword against another sword in theatrical-style duel . Do not bang your sword against any hard object to test its strength or the "sound" of the steel as it hits a hard object. No matter how tough or strong the steel is in any sword, it will nick when struck against something equally hard. In stage plays or in movies, theatrical swords with wide, thick edges are used. The edges are flat and often as much as 1/16 inches wide. Such theatrical swords are designed to take the flashy looking punishment of banging edges together. Your sword is not a theatrical sword. Your sword is a real weapon, designed so that they could fight in the manner that the originals were actually used. Since the cutting edges could easily be sharpened and were often used for slashing, parries were made with the flat of the blade (not the edges) or were simply avoided altogether. Real swords were never used for the theatrical style sword banging that movies or stage plays rely on to liven up action sequences.Do not attempt to chop down a tree with your sword. Such an activity is guaranteed to damage your sword. Axes and machetes are well designed for this with the weight of the steel concentrated over the point of percussion. When you strike a firmly fixed object like a tree or a thick branch with a sword, a great deal of the blade projects past the object being cut, causing the blade to bend or torque. It should be pointed out that the Japanese, who believe in a lot of practice with the sword, used thick bamboo. The bamboo was resistant to a cut, but didn't have the rigidity of a tree, and so would not have damaged a valuable blade. For a Japanese warrior to cut in to a tree would have been unthinkable.Paul Chen Practical Basket Hilt Broadsword Sword
by HanweiThe Paul Chen Practical Basket Hilt Broadsword Sword with ScabbardThe Paul Chen Practical Basket Hilt Broadsword is built for the re-enactor. The blade is unsharpened, with 1/16" safety edges and rounded tips, complying with the combat rules of many re-enactment societies. The blade is crafted in 1065 high-carbon steel, hardened to 50HRC, which reduces edge notching to acceptable levels while providing resilience and protection against brittleness. The scabbard is finished in matte black, ready for owner customization if desired.Although Basket Hilt swords appeared throughout Britain from the mid-sixteenth century on, their association with the seventeenth and eighteenth century Scottish highlander has become legendary. Early highland swords almost invariably carried the double-edged "broadsword" blade but by the time of the Battle of Culloden (1746) the single-edged "backsword" was at least equal in popularity.
This fully functional broad sword is tailored to meet the demands of re-enactment and stage combat.Overall Length: 38 1/8"
Sword Weight: 2 lbs
Blade Length: 31 3/4"
Handle Length: 6 1/2"
Blade Material: 1065 high carbon steel, hardened to 50HRC , unsharpened, rounded tip
Point of Balance: 5"
Point of Harmonics: 20"
Width at Guard: 1.67"
Width at Tip: .73"
Thickness at Guard: .23"
Thickness at Tip: .15"
Factory: Hanwei China
Designer: Paul Chen
Rated: Fully Functional no edge
Authentic styling
Great for re-enactors
Complies with safety requirements
Warning:
All Edged Weapons, Battle Ready or Not, May Injure, Kill
and/or Become Damaged if Used ImproperlyYou must be at least 19 years of age in order to purchase any knife or sword from this site. By ordering any knife or sword you are certifying that you are at least 19 years of age. Purchaser is responsible for compliance with all applicable laws and regulations, which may vary. By accepting delivery purchaser agrees that RealCoolSavings and affiliated companies and individuals have no liability to purchaser, or any person whatsoever arising from any use of products purchased from this site.
Sword Care Do and Don't
Sword Do's & Don'ts:
All edged weapons, battle ready or not, may injure, kill and/or become damaged if used improperly. Follow these do's and don'ts to safely enjoy your sword(s) for years to come.
Use common sense. Do not swing any edged weapon carelessly. Keep in mind that your sword, battle ready or not, is still a potential weapon that can injure or kill someone. Although we all have a "warrior" inside of us, we are not always on a battlefield. Make sure you are in an area where you can swing your weapon without hitting someone or something. Swords can also slip out of your hands. Selling your sword to pay for a lawsuit settlement is a big bummer. Be very careful and use common sense when handling your sword.Do not bang your sword against another sword in theatrical-style duel . Do not bang your sword against any hard object to test its strength or the "sound" of the steel as it hits a hard object. No matter how tough or strong the steel is in any sword, it will nick when struck against something equally hard. In stage plays or in movies, theatrical swords with wide, thick edges are used. The edges are flat and often as much as 1/16 inches wide. Such theatrical swords are designed to take the flashy looking punishment of banging edges together. Your sword is not a theatrical sword. Your sword is a real weapon, designed so that they could fight in the manner that the originals were actually used. Since the cutting edges could easily be sharpened and were often used for slashing, parries were made with the flat of the blade (not the edges) or were simply avoided altogether. Real swords were never used for the theatrical style sword banging that movies or stage plays rely on to liven up action sequences.Do not attempt to chop down a tree with your sword. Such an activity is guaranteed to damage your sword. Axes and machetes are well designed for this with the weight of the steel concentrated over the point of percussion. When you strike a firmly fixed object like a tree or a thick branch with a sword, a great deal of the blade projects past the object being cut, causing the blade to bend or torque. It should be pointed out that the Japanese, who believe in a lot of practice with the sword, used thick bamboo. The bamboo was resistant to a cut, but didn't have the rigidity of a tree, and so would not have damaged a valuable blade. For a Japanese warrior to cut in to a tree would have been unthinka