2 X 6L6g RCA Tubes Smoked Glass Very Strong Matched Pair
Item History & Price
| Reference Number: Avaluer:51294725 | Brand: RCA |
2 x 6L6g RCA Tubes
Made in USA
Codes KC & 5-43
Lower DD Getters
Tested on enhanced Tripplet E3444 Laboratory Tester
5900 micromhos @ 68 mA
6200 micromhos @ 70 mA
Bogey(100%) = 6000 micromhos @ 72mA +/- 10%
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufactur...ers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-14.0___Volts bias or Cathode resistance*
What were your tubes tested at?
Ask any questions before buying, not after
I do combine S&H
00165
Made in USA
Codes KC & 5-43
Lower DD Getters
Tested on enhanced Tripplet E3444 Laboratory Tester
5900 micromhos @ 68 mA
6200 micromhos @ 70 mA
Bogey(100%) = 6000 micromhos @ 72mA +/- 10%
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufactur...ers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__250_Volts plate, __250_Volts screen, ___-14.0___Volts bias or Cathode resistance*
What were your tubes tested at?
Ask any questions before buying, not after
I do combine S&H
00165
