Amiga X - Surf 100 Ethernet Card With RapidRoad USB Device
Item History & Price
X-Surf 100 network card combined with the RapidRoad USB device
...); background-color: rgb(255, 255, 255);">The X-Surf 100 is a 100 Mbit Ethernet Zorro-II/III Card for big box Amiga computers with a free Zorro slot: A2000, A3000, A4000 and A4000T.
For stable operation, a Buster-11 chip is recommended.Instruction manual included.
Ethernet interface: Asix AX88796BLF Ethernet chip (NE2000 compatible) 100 MBit/s transfer rate RJ45 connector 16 kB data-buffer Zorro III interface with Z2/Z3 auto sensing SANA 2 and NetBSD drivers
RapidRoad USBinterface provides two USB ports isp1763 USB host controller chip compatible to USB 1.1 and 2.0 specifications supports USB 2.0 high-speed mode (480 Mbps) card features clock port and proprietary X-Surf 100 expansion connectors two expansion variants exist that differ with regard to the connection options and the scope of delivery X-Surf 100Model: · clock port connector disabled, expansion is onlyusable on the X-Surf 100· bare board with no protective cover or USB portbracket two floppy power connectors on the card to supply power to the USB ports - the second port can be used for the floppy, thus an Y cable is not needed this is only needed when used on a clock port (clock port doesn't provide enough power) if power hungry devices are used, it is also recommended when installed on the X-Surf supplies up to 1.5 ampere per USB port only supports PIO (Programmed I/O) operation (no DMA), thus having higher load on the CPU during transfers typical data rates: 7.5 MB/s (Zorro III), 2.5 MB/s (Zorro II), 700 kByte/s (Clock Port) Notes when installed on the X-Surf, their external USB ports are activated - the internal ports of the RapidRoad can only be used if the respective external port stays empty white status LED on board indicates proper connection power on the USB ports is only switched on upon start of USB stack, this conforms to USB specification shipped with Poseidon 4.5 OEM USB stack requires at least 68020 processor, 2.5 MB free Fast RAM, MUI, OS3.0 driver for e.g., USB mouse and keyboard (HID devices), mass storage, parallel interface (printers) and USB-serial bridges
Short manuals (2) and Poseidon 4.5 disk with USB and X-Surf.device drivers included, also includes the EasyNet CD
...); background-color: rgb(255, 255, 255);">The X-Surf 100 is a 100 Mbit Ethernet Zorro-II/III Card for big box Amiga computers with a free Zorro slot: A2000, A3000, A4000 and A4000T.
For stable operation, a Buster-11 chip is recommended.Instruction manual included.
Ethernet interface: Asix AX88796BLF Ethernet chip (NE2000 compatible) 100 MBit/s transfer rate RJ45 connector 16 kB data-buffer Zorro III interface with Z2/Z3 auto sensing SANA 2 and NetBSD drivers
RapidRoad USBinterface provides two USB ports isp1763 USB host controller chip compatible to USB 1.1 and 2.0 specifications supports USB 2.0 high-speed mode (480 Mbps) card features clock port and proprietary X-Surf 100 expansion connectors two expansion variants exist that differ with regard to the connection options and the scope of delivery X-Surf 100Model: · clock port connector disabled, expansion is onlyusable on the X-Surf 100· bare board with no protective cover or USB portbracket two floppy power connectors on the card to supply power to the USB ports - the second port can be used for the floppy, thus an Y cable is not needed this is only needed when used on a clock port (clock port doesn't provide enough power) if power hungry devices are used, it is also recommended when installed on the X-Surf supplies up to 1.5 ampere per USB port only supports PIO (Programmed I/O) operation (no DMA), thus having higher load on the CPU during transfers typical data rates: 7.5 MB/s (Zorro III), 2.5 MB/s (Zorro II), 700 kByte/s (Clock Port) Notes when installed on the X-Surf, their external USB ports are activated - the internal ports of the RapidRoad can only be used if the respective external port stays empty white status LED on board indicates proper connection power on the USB ports is only switched on upon start of USB stack, this conforms to USB specification shipped with Poseidon 4.5 OEM USB stack requires at least 68020 processor, 2.5 MB free Fast RAM, MUI, OS3.0 driver for e.g., USB mouse and keyboard (HID devices), mass storage, parallel interface (printers) and USB-serial bridges
Short manuals (2) and Poseidon 4.5 disk with USB and X-Surf.device drivers included, also includes the EasyNet CD