1 - Western Electric 5842/417A Tube Black Plate Strong 1954 23, 500 Gm
Item History & Price
Reference Number: Avaluer:7380631 | Brand: Western Electric |
1 - Western Electric 5842/417A Tube
Made in USA
Black Plates
Codes 413 = 1954
Tested on enhanced Tripplett E3444 Laboratory Tester prepared by Paul Hart of Roswell Ga.
23, 500 micromhos @ 25 mA
Bogey(100%) = 25, 000 @ 25 mA +/- 10%
I do combine S&H
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube ma...nufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__150_Volts plate, __150_Volts screen, ___60___Volts bias or Cathode resistance(CBR)
S&H to China, Italy and a few other countries will require a Tracking # and will cost a minimum of $31, depending on weight.
00054
Made in USA
Black Plates
Codes 413 = 1954
Tested on enhanced Tripplett E3444 Laboratory Tester prepared by Paul Hart of Roswell Ga.
23, 500 micromhos @ 25 mA
Bogey(100%) = 25, 000 @ 25 mA +/- 10%
I do combine S&H
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube ma...nufacturers. This tester applies test conditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__150_Volts plate, __150_Volts screen, ___60___Volts bias or Cathode resistance(CBR)
S&H to China, Italy and a few other countries will require a Tracking # and will cost a minimum of $31, depending on weight.
00054