1 X 6JK6 RCA Tube Very Strong Bogey Testing NOS NIB
Item History & Price
| Reference Number: Avaluer:7471757 | Type: Vacuum Tube |
| Brand: RCA |
1 x 6JK6 RCA Tube
Made in USA
NOS
NIB
Tested on enhanced Triplett E3444 by Paul Hart of Ga.
17, 300 micromhos @ 12.2 mA
Bogey(100%) = 18, 000 @ 11.5 ma +/- 10%
I do combine S&H
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test con...ditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__125_Volts plate, __125_Volts screen, ___68 ohm___ Cathode resistance(CBR)
What were your tubes tested at?
S&H to China, Italy and a few other countries will require a Tracking # and will cost a minimum of $31, depending on weight.
00013
Made in USA
NOS
NIB
Tested on enhanced Triplett E3444 by Paul Hart of Ga.
17, 300 micromhos @ 12.2 mA
Bogey(100%) = 18, 000 @ 11.5 ma +/- 10%
I do combine S&H
The measurements in this listing were taken on a Triplett 3444 modified to test the tube as an amplifier in accordance with RMA/EIA specifications, utilized by all US and most foreign tube manufacturers. This tester applies test con...ditions for this tube as shown below (including the precise filament voltage) and then measures transconductance (gm) in accordance with the engineering definition of gm. Tubes may also be operated under the test conditions for extended periods to be sure that it is stable. A tube must be tested in this manner to compare its test results with the manufacturer’s original intent or with other tubes of the same type. Most tube testers do not apply the test conditions required or conduct a valid gm test. For more details on the test and our test equipment, please contact us.The test conditions for this listing are__125_Volts plate, __125_Volts screen, ___68 ohm___ Cathode resistance(CBR)
What were your tubes tested at?
S&H to China, Italy and a few other countries will require a Tracking # and will cost a minimum of $31, depending on weight.
00013
