Sansui F - 1180 Driver Board Rebuild Receiver Recap Kit For 1000x 2000x 2000A QRX
Item History & Price
| Reference Number: Avaluer:7564519 | Model: F-1180 |
| Brand: Sansui | Country/Region of Manufacture: United States |
Upfor sale here is this Sansui F-1180 driver board rebuild set. This includes all the parts you need to rebuild an F-1180, F-1180A, F-1180F, or F-1180G board. These boards are found in the Sansui 1000X, 2000A, 2000X, 3300, QRX-4500, QRX-6500, and possibly others. Over time the driver boards start developing issues with transistors and capacitors, and often the old parts are weak and failing. We will make them new again! This kit includes enough parts to re...place all the electrolytic capacitors, transistors, and the four trimmers. Because different F-1180 variants have different capacitor values, there will be extra parts left over. This kit includes parts to replace all of the transistors, including the bias transistors, but you don't necessarily need to replace those if they are working fine.
These are all high-quality brand new genuine parts. The capacitors are all Nichicon PW and Wima film caps at the correct uf and the same or higher voltage ratings, the trimmers are new Bourns trimmers, and the transistors are the correct Fairchild/Onsemi subs for the original transistors. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Sansui gear. Just recapping the driver board is a waste of time if you're not going to replace the transistors as well, which is why this kit includes both. A lot of times the transistors age worse than the caps, so you should definitely change out the transistors while you're in there.
I will include a surprisingly well-written instruction sheet, but rebuilding a board is at least mildly complicated, and you should know what you're doing and have a decent soldering iron. If you're replacing the bias transistors you will need heat-sink compound and heat-shrink tubing as well. This kit may not fix your Sansui if it has other issues, but it will definitely help it run better, and should fix almost any driver board problems. If you have other Sansui issues, the good folks at Audiokarma can help you out. Obviously the parts in this kit can be used on any gear, but other boards do require different parts, and I do not have kits available for those yet. Please see my pictures for details.
US shipping and handling is $4, and international is $14, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. I accept Paypal. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
00107
These are all high-quality brand new genuine parts. The capacitors are all Nichicon PW and Wima film caps at the correct uf and the same or higher voltage ratings, the trimmers are new Bourns trimmers, and the transistors are the correct Fairchild/Onsemi subs for the original transistors. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Sansui gear. Just recapping the driver board is a waste of time if you're not going to replace the transistors as well, which is why this kit includes both. A lot of times the transistors age worse than the caps, so you should definitely change out the transistors while you're in there.
I will include a surprisingly well-written instruction sheet, but rebuilding a board is at least mildly complicated, and you should know what you're doing and have a decent soldering iron. If you're replacing the bias transistors you will need heat-sink compound and heat-shrink tubing as well. This kit may not fix your Sansui if it has other issues, but it will definitely help it run better, and should fix almost any driver board problems. If you have other Sansui issues, the good folks at Audiokarma can help you out. Obviously the parts in this kit can be used on any gear, but other boards do require different parts, and I do not have kits available for those yet. Please see my pictures for details.
US shipping and handling is $4, and international is $14, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. I accept Paypal. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
00107
