Pair VTG 1950 ' S (Stephens Trusonic) Bullet Horn 16 Ω Ohm Tweeters Speakers Read
Item History & Price
| Reference Number: Avaluer:770336 | Country/Region of Manufacture: United States |
| Brand: Unbranded | MPN: Does Not Apply |
| UPC: Does not apply |
Pair of Vintage 1950's Bullet Horn 16 OHM Tweeters
There are no labels or markings so I don't know who the maker of these are.
These were in a cabinet with a pair of Trusonic 103LX 16 Ohm 15" Woofers
They might be prototypes. IDK
The paint on them is scratched and worn. I am thinking they spent a lot of time on a workbench before they were installed or they were in another cabinet before this. IDK
I took one tweeter apart to see what was on the insid...e and some wires got separated.
Very Very Tiny Wires
It should work after it is properly repaired.
At least you have a picture of what is on the inside.
I'm leaving it up to the buyer to fix and solder this.
They both tested fine with an Ohm meter before I took one apart.
I only got a picture of one with a meter.
There is a picture of the crossover configuration from the original cabinet.
The crossover is not included in this listing.
They weigh 11 pounds each.
The grey bottom magnet portion is 4.5" (11.5 cm) wide by 3" (7.5 cm) tall.
The aluminum speaker portion is 3.5" wide (9 cm) by 2.5" tall (6.4 cm) tall.
The total overall length is 5.5"
There are no labels or markings so I don't know who the maker of these are.
These were in a cabinet with a pair of Trusonic 103LX 16 Ohm 15" Woofers
They might be prototypes. IDK
The paint on them is scratched and worn. I am thinking they spent a lot of time on a workbench before they were installed or they were in another cabinet before this. IDK
I took one tweeter apart to see what was on the insid...e and some wires got separated.
Very Very Tiny Wires
It should work after it is properly repaired.
At least you have a picture of what is on the inside.
I'm leaving it up to the buyer to fix and solder this.
They both tested fine with an Ohm meter before I took one apart.
I only got a picture of one with a meter.
There is a picture of the crossover configuration from the original cabinet.
The crossover is not included in this listing.
They weigh 11 pounds each.
The grey bottom magnet portion is 4.5" (11.5 cm) wide by 3" (7.5 cm) tall.
The aluminum speaker portion is 3.5" wide (9 cm) by 2.5" tall (6.4 cm) tall.
The total overall length is 5.5"
