REHCO 1/24 Brass Chassis Slot Car, Bodies Parma JK Peugeot Vtg Anglewinder
Item History & Price
| Reference Number: Avaluer:8644733 |
REHCO 1/24 Brass Chassis Slot Car w/2 Bodies Parma JK Peugeot Vtg Anglewinder
There are 32 photos of the item below.
---The photos load incrementally below depending on your connection, please allow a few seconds for the photos to appear
--- I was told that the chassis is likely a REHCO that looks like it has had a few rebuild or modification attempts. 3-1/8" chassis (brass floor plate width). Front wheels just under 3" wide measured from outside edge, rear is jus...t over 3-1/8" outside back tires, Wheelbase is approx 3-7/8" (distance between axles). Just under 6" long including slot head. Distance from front edge of brass floor to back of tires is about 4-3/4"
--- I connected the slot tabs to an adjustable DC power supply and the motor runs (I slowly raised the voltage), I don't have a track/transformer set-up but the engine seemed ok (didn't make any odd noises etc).
--- The silver/red #6 I was told is a JK Open Cockpit Ultimate Peugeot body (6-3/4" x approx 3-1/8") has a cracked rear end corner (but still looks ok, the crack is away from the edges and somewhat hidden). The blue body I am told is a PARMA (maybe a NISSAN) (6" not counting the back foil, 3-1/8" wide) has clear plastic sides stapled to it as shown. Both have tape along the bottom edges with mount holes (multiple in some cases, see photos, I don't have the pins).
--- Comes with a set of tires (one has a small chip) and some used slot leads.
--- See photos for condition details.
--- Will be well packed
--- See shipping options above
--- Payment expected within 3 days of purchase (contact me if you need more time).
--- The item description is guaranteed to be accurate but all items are sold as-is unless otherwise stated.
--- I don't have a way to arrange for a local pick-up of this item, I'm sorry for the inconvienence
There are 32 photos of the item below.
---The photos load incrementally below depending on your connection, please allow a few seconds for the photos to appear
--- I was told that the chassis is likely a REHCO that looks like it has had a few rebuild or modification attempts. 3-1/8" chassis (brass floor plate width). Front wheels just under 3" wide measured from outside edge, rear is jus...t over 3-1/8" outside back tires, Wheelbase is approx 3-7/8" (distance between axles). Just under 6" long including slot head. Distance from front edge of brass floor to back of tires is about 4-3/4"
--- I connected the slot tabs to an adjustable DC power supply and the motor runs (I slowly raised the voltage), I don't have a track/transformer set-up but the engine seemed ok (didn't make any odd noises etc).
--- The silver/red #6 I was told is a JK Open Cockpit Ultimate Peugeot body (6-3/4" x approx 3-1/8") has a cracked rear end corner (but still looks ok, the crack is away from the edges and somewhat hidden). The blue body I am told is a PARMA (maybe a NISSAN) (6" not counting the back foil, 3-1/8" wide) has clear plastic sides stapled to it as shown. Both have tape along the bottom edges with mount holes (multiple in some cases, see photos, I don't have the pins).
--- Comes with a set of tires (one has a small chip) and some used slot leads.
--- See photos for condition details.
--- Will be well packed
--- See shipping options above
--- Payment expected within 3 days of purchase (contact me if you need more time).
--- The item description is guaranteed to be accurate but all items are sold as-is unless otherwise stated.
--- I don't have a way to arrange for a local pick-up of this item, I'm sorry for the inconvienence
