Sansui F - 2436 - 1 Driver Board Rebuild Receiver Recap Kit For 8080 9090 890 990
Item History & Price
| Reference Number: Avaluer:17677706 | Model: F-2436-1 |
| Brand: Sansui | Country/Region of Manufacture: United States |
| UPC: Does not apply |
Upfor sale here is this Sansui F-2436-1 driver board rebuild set. This includes all the parts you need to rebuild an F-2436-1 driver board for a Sansui 8080, 9090, 890, or 990. This is not for the Sansui 881 or QRX-7001 driver board--that board is slightly different, and I will have that kit available soon. If you need a kit for the Sansui 8080DB/9090DB, that is different, and is available here.
Over time the driver boards start developing issues with the fuse resi...stors, varistors, diodes, transistors, trimmers, and capacitors, and often the old parts are weak and failing. We will make them new again! This kit includes enough parts to replace all the electrolytic capacitors, all the diodes (including the zener diodes), the two varistors, all the fuse resistors, the four trimmers, and all the transistors except the four big driver transistors (TR11-TR14) and two metal bias transistors (TR07/TR08).
These are all high-quality brand new genuine parts. The capacitors are all Nichicon PW, Nichicon Muse, and Wima film caps at the correct uf and the same or higher voltage ratings, the resistors are all new 1% precision resistors, the trimmers are new Bourns trimmers, the diodes are new 1N4148s, and the transistors are the correct Fairchild/Onsemi subs for the original transistors. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Sansui gear. Doing a partial rebuild of the driver board is a waste of time--you need to replace the fuse resistors, small transistors, AND capacitors, and it's worth doing the diodes and varistors as well, which is why this kit covers all that.
I will include a surprisingly well-written instruction sheet, but this is a fairly complicated and delicate rebuild, and you should know what you're doing and have a decent soldering iron and a dim-bulb tester. The instructions will also explain the 8080/9090 service bulletin and the "light mod" that keeps the tuning dial lit no matter which source is selected.
This kit may not fix your Sansui if it has other issues, but it will definitely help it run better, and should fix almost any driver board problems. If you have other Sansui issues, the good folks at Audiokarma can help you out. Obviously the parts in this kit can be used on any gear, but other boards do require different parts, and I do not have kits available for those yet. Please see my pictures for details.
US shipping and handling is $4, and international is $14, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. I accept Paypal. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
01000
Over time the driver boards start developing issues with the fuse resi...stors, varistors, diodes, transistors, trimmers, and capacitors, and often the old parts are weak and failing. We will make them new again! This kit includes enough parts to replace all the electrolytic capacitors, all the diodes (including the zener diodes), the two varistors, all the fuse resistors, the four trimmers, and all the transistors except the four big driver transistors (TR11-TR14) and two metal bias transistors (TR07/TR08).
These are all high-quality brand new genuine parts. The capacitors are all Nichicon PW, Nichicon Muse, and Wima film caps at the correct uf and the same or higher voltage ratings, the resistors are all new 1% precision resistors, the trimmers are new Bourns trimmers, the diodes are new 1N4148s, and the transistors are the correct Fairchild/Onsemi subs for the original transistors. These are not cheap Made in China parts, they are extremely high-quality and they are what I use when I rebuild Sansui gear. Doing a partial rebuild of the driver board is a waste of time--you need to replace the fuse resistors, small transistors, AND capacitors, and it's worth doing the diodes and varistors as well, which is why this kit covers all that.
I will include a surprisingly well-written instruction sheet, but this is a fairly complicated and delicate rebuild, and you should know what you're doing and have a decent soldering iron and a dim-bulb tester. The instructions will also explain the 8080/9090 service bulletin and the "light mod" that keeps the tuning dial lit no matter which source is selected.
This kit may not fix your Sansui if it has other issues, but it will definitely help it run better, and should fix almost any driver board problems. If you have other Sansui issues, the good folks at Audiokarma can help you out. Obviously the parts in this kit can be used on any gear, but other boards do require different parts, and I do not have kits available for those yet. Please see my pictures for details.
US shipping and handling is $4, and international is $14, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. I accept Paypal. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
01000
