McIntosh MC 2105 Stereo Power Amplifier Autoformer 105 WPC 4 8 16 Ohm
Item History & Price
Reference Number: Avaluer:17883612 | Model: MC 2105 |
Type: Power Amplifier | Modified Item: No |
Brand: McIntosh | Country/Region of Manufacture: United States |
UPC: Does not apply |
SPECIFICATIONS for McIntosh MC 2105SPECIAL FEATURESThe amplifier is completely stable when connected to any loudspeaker system or even to any reactive loads. The MC 2105 has special circuits to prevent damage by short circuit or open circuit of the output loads, or by any amount of output impedance mismatch.Thermal cutouts are mounted on the output transistor heat sinks to provide protection in the event of inadequate ventilation.POWER OUTPUT210 watts RMS continuous power stereo, 105 watts per channel Both operating into 4 ohm, 8 ohm, or 16 ohm loads.HARMONIC DISTORTIONLess than 0.25% at any power output from 20 Hz to 20, 000 Hz both channels operating. Typical performance is less than 0.1% at rated power. Distortion decreases as output power is reduced.INTERMODULATION DISTORTIONLess than 0.25% for any combination of frequencies 20 Hz to 20, 000 Hz at 210 peak watts output per channel or at any level less than 210 peak watts per channel. Both channels operating.FREQUENCY RESPONSEAt rated output both channels operating +/- 0, -.25db. 20 Hz through 20, 000 HzNOISE AND HUMGreater than 90 dB below rated output.OUTPUT IMPEDANCE4, 8, and 16 ohm. Full rated power output is provided at each output tap. The 8 ohm output will provide 25 V RMS for constant voltage multiple speaker distribution lines.DAMPING FACTORGreater than 18 at 4 ohms. Greater than 13 at 8 ohms. Greater than 10 at 16 ohms output.INPUT SENSITIVITY & IMPEDANCE0.5 V will produce rated power output; a gain control is provided for each channel allowing independent adjustment of amplification in each channel. Input impedance is 200, 000 ohmsOUTPUT POWER MONITOR METERMeter is calibrated to read 0 dB when amplifier produces rated output. Meter range switch is provided to increase meter sensitivity by 10 dB or 20 dB.HEADPHONE OUTPUTDesigned for low impedance headphones.CONTROLSPower on-off switch, speaker on-off switch, left gain, right gain, meter range switch.SEMICONDUCTOR COMPLIMENT34 silicone transistors, 18 silicone rectifiers and diodes
POWER REQUIREMENTS117 volts AC 50/60 Hz, 90 watts, at zero signal output, 430 watts at rated output.
MECHANICAL SPECIFICATIONSSIZE: Front panel, 16-3/4” wide by 7-1/8” high; chassis 14-7/8” wide by 6-9/16 “ high by 14-1/2” deep, including connectors. Clearance in front of mounting panel including knobs, 1-1/2”.FINISHFront panel: anodized Golden black.gold and black.CHASSISChrome and black.MOUNTINGConvenient, professional PANLOC.WEIGHT65 lbs, 80 lbs in shipping carton.
SHIPPINGWe have much experience successfully shipping sensitive electronics. Fast shipping, typically with a one day turnaround time.*Please review our feedback.*We professionally package your purchase in house and we are experts in shipping electronics such as these. We properly secure the shipment and get it to you like it left us.We take pride in our packing abilities and this will be evident from the moment your package arrives.Full insurance is included as well to protect both of our interests. If an item arrives damaged, the buyer is responsible to notify the seller immediately, retain all shipping materials, and upon request make them available to FedEx for inspection. Failure to cooperate may void your claim and rights to a refund. If a refund is due, the buyer agrees to wait for funds from FedEx. If FedEx denies the claim, the seller may still indemnify.Your item will be shipped via FedEx Ground and the tracking number can be found in “My eBay” under “Purchase History”. However, the most up to date status of your package will be found online at FedEx.com, not on eBay.SHIPPING QUOTED IS FOR THE LOWER 48 STATES, OTHERWISE MESSAGE US FOR A QUOTEFedEx Ground does not ship to PO Boxes or AFB, APO, FPO, or DPO addresses.