Vintage 1970 ' S Marantz 1150 Integrated Stereo Amplifier Sounds & Great
Item History & Price
Vintage 1970's Marantz Integrated Amplifier. Powerful 75 Watts per Channel. Sounds Great!I am starting to thin down my stereo collection and unfortunately going to let this great amp go. I brought it to the best stereo repair store in town and had them check it out before I offed it for sale. It served as my solid state, super sounding 1970's integrated amp for my stereo system, opposite my tube amp. The power rating is 75 wall shaking watts per channel. It has inputs for TWO turntable...s, two tape decks, a tuner, and one aux input. The outputs are for two pairs of speakers. The preamp and amp stages can be separated if so desired. Cosmetics are near mint. There are a couple of faint scratchs in the back top left corner and the bottom right corner. Neither can be seen when it is stacked in your stereo unit (See photos). Also, there is a very tiny rub on top, but it is barely visible, plus someone forgot to put the middle screws back in the bottom plate, but it does not affect anything with the amp and is not visible when it is situlated and playing (See photos). The pilot light works and the lettering is all intact and in perfect condition. It is heavy, around 40 pounds packed, so it will be double boxed for safe shipping. Contact me for local pickup as I am willing to travel around two hours to meet a buyer. Good luck on this GREAT, world-class vintage Marantz integrated amplifier, located right here in the USA ready to be shipped out to the lucky winner!Details:Country: United States of America (USA)Manufacturer / Brand: Marantz (Japan)Year: 1976/1977Category: Audio Amplifier or mixerMain principle: Audio-AmplificationPower type and voltage: Alternating Current supply (AC) / 110; 120; 220; 240 VoltPower out: 150 watts - 75 watts RMS per channel into 8 Ohms Model: Console Stereo Amplifier 1150 - MarantzMaterial: Metal caseShape: Book-shelf unit.Dimensions (WxHxD): 376 x 144 x 301 mm / 14.8 x 5.7 x 11.9 inchNotes:A hi-fi stereo integrated amplifier with power output of 75 watts RMS per channel into 8 Ohms housed in a metal case. With selectable tone turnover points, Bass, Mid, and Treble tone controls, flexible tape monitoring and copy function for two tape decks, full complementary direct coupled output. Jacks for Microphone, Dubbing, and Headphones. On the back, RCA phono sockets for input Phono 1 (MM), Phono 2 (MM), Tuner, Aux, for input/output Tape 1, Tape 2 and for Scope Output, Main In, Pre Out, DIN input/output sockets for Tape 1, Tape 2, terminals for two pairs of loudspeakers (Main and Remote) and six AC outlets, four unswitched and two switched. Specification: Rated Power Output: 75 Watts per channel into 8Ω Continuous Average PowerBoth channels driven: 20Hz-20kHzTotal Harmonic Distortion: 0.1%Frequency Response @ 1 Watt Output: 5Hz-50kHz ±1dBIntermodulation Distortion: 0.1%Preamplifier Section Total Harmonic Distortion at Rated Output: 0.05%Intermodulation Distortion (SMPTE): 0.02%Frequency Response Phono (Max. variation from RIAA Std) Tape or Aux 20Hz-20kHz ±0.5dB
15Hz-50kHz ±1dBSignal to Noise Ratio (at rated output) Aux Input: (0.775V input level) Phono Input: (7.5mV input level) Phono Dynamic Range: 111dB Tape Output Level (Ref.: 7.75mV @ phono input)775mVVersions/Power requirementsUS / 120V AC 50/60HzDesigned in USA, Produced in JapanNet weight: 14.8 kg / 32 lb 9.6 oz (32.599 lb)From a Smoke Free HomeFREE Shipping!Continental US OnlyNO Returns
15Hz-50kHz ±1dBSignal to Noise Ratio (at rated output) Aux Input: (0.775V input level) Phono Input: (7.5mV input level) Phono Dynamic Range: 111dB Tape Output Level (Ref.: 7.75mV @ phono input)775mVVersions/Power requirementsUS / 120V AC 50/60HzDesigned in USA, Produced in JapanNet weight: 14.8 kg / 32 lb 9.6 oz (32.599 lb)From a Smoke Free HomeFREE Shipping!Continental US OnlyNO Returns
