Sansui AU - 717 Stereo Integrated Amplifier, Pro Repaired, W/Shop Receipt
Item History & Price
| Reference Number: Avaluer:29704621 | Model: AU-717 |
| MPN: Does Not Apply | Country/Region of Manufacture: Japan |
| Brand: Sansui | Type: Integrated Amplifier |
| UPC: Does not apply |
This Sansui was recently service by a master tech12 resistors and 4 caps were replacedBias current was also adjustedIt sounds great as operates as it shouldThe case could use a good cleaningAs with all vintage audio gear there isn't a return on this itemIt will be packed well with a thick box and plenty of paddingShip the lower 48 states only
Speakers of a minimum of 8 ohms
Specs are as follows
Power output: 85 watts per channel into 8Ω (stereo)Frequency response: 20H...z to 20kHzTotal harmonic distortion: 0.025%Damping factor: 60Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 78dB (MM), 100dB (line)Channel separation: 60dB (MM), 65dB (line)Output: 150mV (line), 1V (Pre out)Speaker load impedance: 8Ω (minimum)Dimensions: 430 x 168 x 389mmWeight: 17.8kgYear: 1978On Oct-09-20 at 10:23:49 PDT, seller added the following information:Because of the price of this Item I will not accept bids with less then 20 positives feedbacks, your bid will be rejected unless you notify me 1st, sorry
Speakers of a minimum of 8 ohms
Specs are as follows
Power output: 85 watts per channel into 8Ω (stereo)Frequency response: 20H...z to 20kHzTotal harmonic distortion: 0.025%Damping factor: 60Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 78dB (MM), 100dB (line)Channel separation: 60dB (MM), 65dB (line)Output: 150mV (line), 1V (Pre out)Speaker load impedance: 8Ω (minimum)Dimensions: 430 x 168 x 389mmWeight: 17.8kgYear: 1978On Oct-09-20 at 10:23:49 PDT, seller added the following information:Because of the price of this Item I will not accept bids with less then 20 positives feedbacks, your bid will be rejected unless you notify me 1st, sorry
