Mid-century wall lamp made of a teak arm with a top groove to fit in the cable. Teak block wall mount with brass wall plate fitted with a pivot joint to allow for a wide scope of adjustments. There are three pre-drilled holes in the brass plate for wall fitting. There is a brass bracket fitted to the top of the teak block wall mount that fits in five carved notches on the teak arm, allowing for adjustment of the lamp's angle. There is a plastic bulb casing with a decorative teak c...up and a new cream linen lampshade. The original switch is placed on the electrical cord. The lamp is in excellent condition and in full working order. It has been rewired and earthed. The lamp takesone e27 bulb. New fabric lampshade.This lamp can be used with 110-230v supplies.As with all vintage electricalequipment, it is advisable to have it checked by a qualified electrician.Please note: We specialise in selling vintage items.Although we strive to give as accurate a description as possible, patina andage-related wear are to be expected. However, we will always indicate anynoticeable defects. Dimensions:Height of shade: 16cm/6.3"Diameter lampshade: 25cm/9.8"Reach of arm from wall: 55-80cm/21.6-31.5"Length of arm: 63cm/24.8"Height of teak wall block:18cm/7.1”Width of teak wall block: 3.5cm/1.4”Length of cord bottom of arm:235cm/92.5"Approximateweight packed: 4kg Please contact mefor any further details/questions. Good luck andhappy bidding!! TAKE A LOOK AT MYOTHER LISTINGS!!!!!!!!!!!