Very Rare Nikko TRM 800 Vintage Amplifier (180 Watts) - 1975
Item History & Price
| Reference Number: Avaluer:29737164 | Model: TRM 800 |
| Type: Integrated Amplifier | Country/Region of Manufacture: Japan |
| Brand: Nikko |
Top of the line amp made in Japan by Nikko. This amp delivers 90 watts per channel into 4 ohms. Three sets of speakers can be hooked up to it, as well a tuner, two phonos, two aux, and two tape decks. There is a separation ability between power amp and pre-amp to allow for the use of an equalizer or a different power amp if desired.
I ran this amp for about a week without an issue. I cleaned the pots. It sounds nice. I strongly recommend a te...chnician look at this amp to tweak it back to its full glory. As with all vintage stereo equipment I put up for auction on e-bay, the bidder should be comfortable knowing that eventually a technician will have to repair something (it is 45 years old after all). But who knows, it could run for another 45 years before something needs to be repaired.
Cosmetically, it is missing a knob and has a few imperfections on the wood case.
I am setting the opening bid very low.
The amp will be packaged properly for shipping. I am happy to answer any questions you may have.
Power output: 90 watts per channel into 4Ω (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.1%Input sensitivity: 2.5mV (MM), 180mV (line)Output: 150mV (line), 30mV (DIN)Speaker load impedance: 4Ω (minimum)Dimensions: 450 x 150 x 340mmYear: 1975
I ran this amp for about a week without an issue. I cleaned the pots. It sounds nice. I strongly recommend a te...chnician look at this amp to tweak it back to its full glory. As with all vintage stereo equipment I put up for auction on e-bay, the bidder should be comfortable knowing that eventually a technician will have to repair something (it is 45 years old after all). But who knows, it could run for another 45 years before something needs to be repaired.
Cosmetically, it is missing a knob and has a few imperfections on the wood case.
I am setting the opening bid very low.
The amp will be packaged properly for shipping. I am happy to answer any questions you may have.
Power output: 90 watts per channel into 4Ω (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.1%Input sensitivity: 2.5mV (MM), 180mV (line)Output: 150mV (line), 30mV (DIN)Speaker load impedance: 4Ω (minimum)Dimensions: 450 x 150 x 340mmYear: 1975
